Using an SH1/20 and looking to make the fuel mix a bit richer lower down the throttle position
Looking at the slides available on SR and there are
5914/1
5914/2
7895/1
7895/2
slides available. Based purely on the reasoning that the 7895/1 is for the GP200 and therefore likely to be the richest I'm guessing that in order or richness they would be ordered
7895/1
7895/2
5914/1
5914/2
From rich to weak?
Probably totally rubbish so any help on that appreciated!
http://www.scooterrestorations.com/lamb ... -3-and-gp/
Which slide is the richest?
- Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
Yes, that's basically it. One is richer than two. In both cases the 2 will have a larger cut out.
-
- registered user
- Posts: 397
- Joined: Thu Jan 15, 2009 1:42 pm
- Location: Sunny Manchester
- Contact:
Thanks , so is there is a difference between a 5914/1 and a 7895/1 then in terms of richness?
I have a 5014-1 fitted at the moment so I want to know if changing to one of the slides above will make a difference?
I have a 5014-1 fitted at the moment so I want to know if changing to one of the slides above will make a difference?
- Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
Other than the fact that one is for a 22mm carb and the other a 20mm.
-
- registered user
- Posts: 397
- Joined: Thu Jan 15, 2009 1:42 pm
- Location: Sunny Manchester
- Contact:
Thanks all. So looks like I have the wrong slide in as nothing on the Cam Lam list has 5014-1, so I'll have a look for one of the ones listed but it probably wont make much of difference richness wise but you never know.
(mine is a Lui 50 running a Centro barrel bored out to 125 with an SH1/20 so cant just take the standard and will need to experiment)
(mine is a Lui 50 running a Centro barrel bored out to 125 with an SH1/20 so cant just take the standard and will need to experiment)