Front hub /fork problems

[garry inglis]

Definitely needs a thin nut you buy them especially for the front hub also are you sure there series 3 fork links and not series 2 which are different

On the first pic I have 35mm from the top hat of thread and 27mmon the other side this is a series 3 front hub

Sent from my SM-A320FL using Tapatalk

The thin nut is 7mm and is original

Sent from my SM-A320FL using Tapatalk

[garry inglis]

Have you got the bolt the right way round

[TexasUK]

Bolt is right way round, though I don't think that would make any difference anyway.

I couldn't vouch for them being GP or Series 2, I'll try to definitivly identify them later today.

I have the correct 7mm nuts.

Thanks for the help so far.

[HxPaul]

If the peg on the link is too long.If I were you I'd get some more links,preferebly a pair of Innocenti links,you shouldn't have to alter the links at all.

[wrecklessrobbie]

Im no expert...far from it.
The links you have look to me like my s2 spanish links.
Mindst i could be wrong.
Hopefully someone with a bit more knowledge than me can confirm one way or the other.

Robbie

[YAMLAM]

would the links being series 2 make any difference ?
in sure racers used to prefer series two links .
where`s Shocky when you need him

[TexasUK]

Think I've found the main problem:



Need to find some nice big bars to do some levering, hopefully won't have to paint them again.

I get fed up with being taken for a ride by some suppliers. Life's hard enough without other people not doing their jobs properly.

[wrecklessrobbie]

Hmmm that doesnt look good.
They look slightly twisted.
Mindst it could be my eyes.

The amount of times ive bought stuff and its wrong or doesnt fit .....
I try now to stick to reputable dealers. Makes life easier.
There are some very good and helpfull guys out there.
Hopefully you will solve it.