Kickstart engagement.
-
- registered user
- Posts: 908
- Joined: Wed Jul 15, 2015 11:52 pm
- Main scooter: lambretta gp
- Location: east yorkshire
- Contact:
i would try making the slot for the peg longer and see if that helps, it could just be a badly made piston and a bad shaft, combined making it worse, or maybe just buy a better piston and new spring, and try them all together, ive heard of this problem before and known a new shaft fix it, lets face it the kickstart design is not very efficient on a lambretta and has to be very good to work perfectly, check the peg is not hitting the engine casing as well, they can be to long, i had some problems with my kickstart on my rotax and a new casa shaft and piston fitted perfectly, but they are not cheap.
-
- registered user
- Posts: 525
- Joined: Fri Aug 06, 2010 2:03 pm
- Main scooter: Series 1 li150 1958
- Location: north of hadrians wall
- Contact:
Plan A the slot
Plan B phone JB & pass on the bill!
Thanks for the advice folks will keep yous posted
Plan B phone JB & pass on the bill!
Thanks for the advice folks will keep yous posted
-
- registered user
- Posts: 525
- Joined: Fri Aug 06, 2010 2:03 pm
- Main scooter: Series 1 li150 1958
- Location: north of hadrians wall
- Contact:
Slot ground out, no difference!
Mozambique!
Mozambique!
-
- registered user
- Posts: 525
- Joined: Fri Aug 06, 2010 2:03 pm
- Main scooter: Series 1 li150 1958
- Location: north of hadrians wall
- Contact: