Trying to run a Suzuki 185 piston on a TV175 barrel, it’s not working out too well.
Any options out there for that crank set up? Thinking Mugello 185 or BGM etc, don’t fancy an RB20
60x115 Crank Kit Options
- Rich_T
- Dealer
- Posts: 540
- Joined: Fri May 29, 2009 8:07 pm
- Main scooter: Li Special
- Location: Birmingham
- Contact:
You can run a GT186 on a 60x115 rod. You'll need 8mm packing but the cylinder is 3mm shorter than stock so it will all fit under the cowlings, worst case is to make a 5mm packer between between head cowling mag flange.