Fork links

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
HxPaul
registered user
Posts: 1088
Joined: Fri Dec 06, 2013 1:58 pm
ebay user ID: panhead_5
Main scooter: lambretta Li 150
Location: Halifax,Yorkshire
Contact:

Tue Feb 27, 2018 11:39 pm

Thats definitely better.

User avatar
jason frost
Dealer
Posts: 581
Joined: Wed Jan 07, 2009 11:45 am
Contact:

Tue Feb 27, 2018 11:57 pm

If it's the anti dive one that's how they are , all the peg is doing is stopping the Speedo housing moving

wrecklessrobbie
registered user
Posts: 407
Joined: Thu Jan 09, 2014 7:34 pm
Main scooter: li150
Location: York
Contact:

Wed Feb 28, 2018 10:54 am

jason frost wrote:If it's the anti dive one that's how they are , all the peg is doing is stopping the Speedo housing moving
Yes Jason. Its the anti dive version.
Does the lug not need to be further into the housing?
Or is it relying on the anti dive bracket to hold the speedo hub from potentially turning?

Sent from my SM-J320FN using Tapatalk


User avatar
jason frost
Dealer
Posts: 581
Joined: Wed Jan 07, 2009 11:45 am
Contact:

Wed Feb 28, 2018 9:06 pm

All the braking force is on the anti dive bracket, all the lug is doing is stopping the Speedo housing from spinning round .

wrecklessrobbie
registered user
Posts: 407
Joined: Thu Jan 09, 2014 7:34 pm
Main scooter: li150
Location: York
Contact:

Wed Feb 28, 2018 9:28 pm

jason frost wrote:All the braking force is on the anti dive bracket, all the lug is doing is stopping the Speedo housing from spinning round .
Ah right. So looking at the photo i should be ok using the disc brake then?
I did wonder...but to be honest was unsure...and dont want to build it incorrectly.

Sent from my SM-J320FN using Tapatalk


User avatar
jason frost
Dealer
Posts: 581
Joined: Wed Jan 07, 2009 11:45 am
Contact:

Thu Mar 01, 2018 4:28 pm

wrecklessrobbie wrote:
Wed Feb 28, 2018 9:28 pm
jason frost wrote:All the braking force is on the anti dive bracket, all the lug is doing is stopping the Speedo housing from spinning round .
Ah right. So looking at the photo i should be ok using the disc brake then?
I did wonder...but to be honest was unsure...and dont want to build it incorrectly.

Sent from my SM-J320FN using Tapatalk
Yes , check that it won't pop out and your good to go

wrecklessrobbie
registered user
Posts: 407
Joined: Thu Jan 09, 2014 7:34 pm
Main scooter: li150
Location: York
Contact:

Thu Mar 01, 2018 6:00 pm

Ok Jason.
I shall have another try of it.
It was tight fitting into the links so am thinking it will not come out.....famous last words...
Thank you for your replies.

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 5 guests