Carb Flange Rubbers

[Norrie Bodge]

whats people using ???
seen these but is anyone using these mallossi type?
& if so whats the quality of these like?
https://ve-uk.com/2017/05/11/malossi-un ... b-rubbers/

im wanting one for use with a Dellorto 32mm VHSA on a LTH left hand TS1 manifold.
it has 60mm stud spacings

cheers

[Timbo]

I use the MB ones which are ribbed. The new ones in brown are meant to be stronger and better.

[Paul_from_Thornbury]

My original MB one split for my 28mm PWK, MB and all UK stockists are sold out, as are Scooter Center

Ended up having to get one of these
http://www.scooter-center.com/en/produc ... 71856*carb rubber*24*24*2*16

Pedparts do this one, I ordered one as well as its cheap, its a couple of mm too small (largest 32mm option, need a 34mm), but it will do as a toolbox spare in an emergency

http://www.pedparts.co.uk/product/865/s ... ld-adaptor#

[Norrie Bodge]

I ended up ordering 2 of these
http://www.nichecycle.com/ncs/categorie ... y-ncs.html

as those from VE where a 55mm stud spacing & I need 60mm