whats people using ???
seen these but is anyone using these mallossi type?
& if so whats the quality of these like?
https://ve-uk.com/2017/05/11/malossi-un ... b-rubbers/
im wanting one for use with a Dellorto 32mm VHSA on a LTH left hand TS1 manifold.
it has 60mm stud spacings
cheers
Carb Flange Rubbers
-
- registered user
- Posts: 450
- Joined: Thu Oct 25, 2012 2:49 am
- Main scooter: GP-1971-Ts230/S2-1960-Ts230
- Contact:
-
- registered user
- Posts: 3
- Joined: Thu Sep 01, 2016 9:47 am
- Main scooter: Lambretta
- Contact:
My original MB one split for my 28mm PWK, MB and all UK stockists are sold out, as are Scooter Center
Ended up having to get one of these
http://www.scooter-center.com/en/produc ... 71856*carb rubber*24*24*2*16
Pedparts do this one, I ordered one as well as its cheap, its a couple of mm too small (largest 32mm option, need a 34mm), but it will do as a toolbox spare in an emergency
http://www.pedparts.co.uk/product/865/s ... ld-adaptor#
Ended up having to get one of these
http://www.scooter-center.com/en/produc ... 71856*carb rubber*24*24*2*16
Pedparts do this one, I ordered one as well as its cheap, its a couple of mm too small (largest 32mm option, need a 34mm), but it will do as a toolbox spare in an emergency
http://www.pedparts.co.uk/product/865/s ... ld-adaptor#
-
- registered user
- Posts: 450
- Joined: Thu Oct 25, 2012 2:49 am
- Main scooter: GP-1971-Ts230/S2-1960-Ts230
- Contact:
I ended up ordering 2 of these
http://www.nichecycle.com/ncs/categorie ... y-ncs.html
as those from VE where a 55mm stud spacing & I need 60mm
http://www.nichecycle.com/ncs/categorie ... y-ncs.html
as those from VE where a 55mm stud spacing & I need 60mm