Ts1 rebuild
Just took top end off the ts1 built it 3 years ago and done another 2000 miles so thought it was time for inspection its on a b piston and piston to boar is ok but ring gap is 0.4 is it time of new rings ?
Last edited by boxofbits on Sun Feb 04, 2018 10:37 pm, edited 1 time in total.
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
agree with above - replace if greater than 0.6mm