series 2 breakdown

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
jbg584
registered user
Posts: 64
Joined: Mon Aug 13, 2012 5:02 pm
Main scooter: Lambretta 1960 series 2
Contact:

Just back from IOW rally on my series 2 original engine. Had a few problems same thing each time after about 5 miles she just stops, actually it happened 4 times not seized as still kicked over but wouldn't start put in new plug started went then 5 miles approx stopped again some lads even tried bumping no go waited 10 minutes or so started first time then approx 5 miles stopped.I think it got just to hot have you or any of the lads got any ideas
Daggs
registered user
Posts: 776
Joined: Wed Jan 07, 2009 1:23 pm
Location: Addington Kent
Contact:

The old fuel cap blockage comes immediately to mind.
Martin20
registered user
Posts: 311
Joined: Sun May 07, 2017 9:25 pm
Main scooter: Lambretta LI 150 Special
Contact:

Condenser on its way out? Had similar issue on mine, cutting out when it got hot!
jbg584
registered user
Posts: 64
Joined: Mon Aug 13, 2012 5:02 pm
Main scooter: Lambretta 1960 series 2
Contact:

Hi will check condenser cheers
Timbo
registered user
Posts: 1276
Joined: Tue Mar 03, 2009 2:46 pm
Main scooter: SX200 and GP230 RT
Location: Luton area.....
Contact:

Stator...?
jbg584
registered user
Posts: 64
Joined: Mon Aug 13, 2012 5:02 pm
Main scooter: Lambretta 1960 series 2
Contact:

Hi changed condenser and new plug and points took her out for the first time in a while still exactly the same just dies out after 5-8 miles have to wait 15 min and she will go fine
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot], Google [Bot] and 43 guests