Series 2 Handlebar

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Geocamper
registered user
Posts: 115
Joined: Sun Jan 26, 2014 11:30 pm
ebay user ID: Eyes32
Main scooter: Tv175 S2- Li 150 S2 Eibar
Contact:

Wed Jul 05, 2017 3:34 pm

The throttle part of the handlebar is loose on my series 2. By loose I mean there's quite a lot of play side to side. Before I start taking things apart is there any parts that could be worn in this area?

cgt75b
registered user
Posts: 789
Joined: Thu Sep 22, 2011 8:05 pm
Main scooter: lambretta
Contact:

Wed Jul 05, 2017 5:33 pm

Hi
It probably just needs a few spacers between the olive and the brass gear change wheel.

Hope that helps

Cgt75b...................... :D

hendy
registered user
Posts: 826
Joined: Mon Jul 07, 2014 10:34 am
Main scooter: lambretta li 125
Location: Tyne and Wear
Contact:

Wed Jul 05, 2017 6:08 pm

cgt75b wrote:Hi
It probably just needs a few spacers between the olive and the brass gear change wheel.

Hope that helps

Cgt75b...................... :D
Except on the throttle wheel. :D

cgt75b
registered user
Posts: 789
Joined: Thu Sep 22, 2011 8:05 pm
Main scooter: lambretta
Contact:

Wed Jul 05, 2017 6:13 pm

hendy wrote:
cgt75b wrote:Hi
It probably just needs a few spacers between the olive and the brass gear change wheel.

Hope that helps

Cgt75b...................... :D
Except on the throttle wheel. :D

Oh s**t 4.00 am starts not good :D

Geocamper
registered user
Posts: 115
Joined: Sun Jan 26, 2014 11:30 pm
ebay user ID: Eyes32
Main scooter: Tv175 S2- Li 150 S2 Eibar
Contact:

Sat Jul 08, 2017 9:00 am

Cheers Guys. The play I have is on the throttle side. Sorry for the vagness in my original post. I have now taken the grips off and I can see wear on the inner throttle rod. The rod inside has worn away which inturn has left play for n the outer throttle handle.

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Google [Bot] and 12 guests