Page 1 of 1
Series 2 Handlebar
Posted: Wed Jul 05, 2017 3:34 pm
by Geocamper
The throttle part of the handlebar is loose on my series 2. By loose I mean there's quite a lot of play side to side. Before I start taking things apart is there any parts that could be worn in this area?
Re: Series 2 Handlebar
Posted: Wed Jul 05, 2017 5:33 pm
by cgt75b
Hi
It probably just needs a few spacers between the olive and the brass gear change wheel.
Hope that helps
Cgt75b......................
Re: Series 2 Handlebar
Posted: Wed Jul 05, 2017 6:08 pm
by hendy
cgt75b wrote:Hi
It probably just needs a few spacers between the olive and the brass gear change wheel.
Hope that helps
Cgt75b......................
Except on the throttle wheel.
Re: Series 2 Handlebar
Posted: Wed Jul 05, 2017 6:13 pm
by cgt75b
hendy wrote:cgt75b wrote:Hi
It probably just needs a few spacers between the olive and the brass gear change wheel.
Hope that helps
Cgt75b......................
Except on the throttle wheel.
Oh s**t 4.00 am starts not good
Re: Series 2 Handlebar
Posted: Sat Jul 08, 2017 9:00 am
by Geocamper
Cheers Guys. The play I have is on the throttle side. Sorry for the vagness in my original post. I have now taken the grips off and I can see wear on the inner throttle rod. The rod inside has worn away which inturn has left play for n the outer throttle handle.