after looking again it seems as though they are LI forks but there is a weld around the tube just underneath the thread on the top although the weld is very good it may mean that there has been a piece cut out at some time to lower the forks.
thanks for your help.
series 2 forks
- DigDug
- registered user
- Posts: 788
- Joined: Wed May 02, 2012 1:00 pm
- Main scooter: Lambretta
- Location: Stroud
- Contact:
I'd check inside the forks - it's easy to drill holes to fit the bolt in buffers.li mick wrote:just had another look,they have holes for the rubbers.so not gp.
i'm going out to have another look again
Did you have to do that?
- HxPaul
- registered user
- Posts: 1110
- Joined: Fri Dec 06, 2013 1:58 pm
- Main scooter: lambretta Li 150
- Location: Halifax,Yorkshire
- Contact:
The TV has an ignition switch and the swichgear is similar to a SX or GP.https://www.flickr.com/photos/ger_oconnell/4733655588/li mick wrote:just out of curiosity Paul,what is the difference in the sreies 2 switchgear between the tv and li ?
thanks,Mick.