Page 1 of 1
Readspeed 5 plate
Posted: Tue May 23, 2017 4:43 pm
by thackers
Is it recommended to soak the clutch plates as you do with a standard clutch? And is the oil used on these plates the same that's used on standard clutch systems? Thank you.
Re: Readspeed 5 plate
Posted: Tue May 23, 2017 5:33 pm
by Padge
yes and yes
Re: Readspeed 5 plate
Posted: Tue May 23, 2017 5:52 pm
by fairspares
Use SAE 90 , not ST 90 oil.
Re: Readspeed 5 plate
Posted: Tue May 23, 2017 6:29 pm
by garry inglis
dont forget your 1to 1.5mm clearence on separation after you fit the circlip use the commpressor as a clutch arm and press the clutch and check for clearence
Re: Readspeed 5 plate
Posted: Wed May 24, 2017 11:20 am
by Burnside
Readspeed recommend Putoline SAE 90 (comes in 500ml bottle with a pic of a Lambretta on it) with their 5 plate clutches
Re: Readspeed 5 plate
Posted: Wed May 24, 2017 4:25 pm
by thackers
Thank you for the advice given, top stuff
Re: Readspeed 5 plate
Posted: Fri May 26, 2017 4:17 pm
by 10 inch Terror
Great clutch.