Casatronic problems

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
Scootermonkey
registered user
Posts: 62
Joined: Sat Jan 10, 2009 4:15 pm
Contact:

Sun May 07, 2017 5:10 pm

Recently fitted a brand new Casatronic kit. Set it up exactly as described on the Casa video on YouTube. I now have a misfire at low revs but only when riding. Rev up in neutral and it's fine. Also, rear light is flickering at low revs which was perfect before fitting the Casa kit. Any ideas anyone?
How hard can it be!
Lambretta, the finest scooter............IN THE WORLD!

mick1
registered user
Posts: 1539
Joined: Sun Dec 04, 2011 7:43 pm
ebay user ID: saxonleaf
Main scooter: Li Avanti 225
Location: York
Contact:

Sun May 07, 2017 6:23 pm

Disconnect the stator and check (with meter) the stator readings.........do they match the manufacturers guidelines ?

User avatar
Scootermonkey
registered user
Posts: 62
Joined: Sat Jan 10, 2009 4:15 pm
Contact:

Sun May 07, 2017 6:55 pm

Thanks. I was going to do that. Are the readings the same as a standard electronic stator plate? If not, anyone have the correct readings?
How hard can it be!
Lambretta, the finest scooter............IN THE WORLD!

mick1
registered user
Posts: 1539
Joined: Sun Dec 04, 2011 7:43 pm
ebay user ID: saxonleaf
Main scooter: Li Avanti 225
Location: York
Contact:

Sun May 07, 2017 7:53 pm

Didn't you get a "manual" with the kit ? maybe check the Cam Lam website or the dealer you got it from. Don't seem to think the readings are as standard.

User avatar
Scootermonkey
registered user
Posts: 62
Joined: Sat Jan 10, 2009 4:15 pm
Contact:

Sun May 07, 2017 8:24 pm

No mate, no instructions or info came with it. I'll try CamLam but it's hard to get an answer on the phone.
How hard can it be!
Lambretta, the finest scooter............IN THE WORLD!

theageofindustry
Dealer
Posts: 47
Joined: Mon Jan 21, 2013 5:53 pm
ebay user ID: pistonported
Main scooter: 74 Vijai Super
Contact:

Tue May 09, 2017 12:31 am

Is the stator plate anodized?

There was a string of these in the US where the stator was having a hard time achieving a good ground on the mag flange from the annodizing. Those who had that issue sanded the annodizing off the back of the stator plate where it touches the mag flange and that resolved it.

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 15 guests