Page 1 of 1


Posted: Sat Apr 08, 2017 9:39 am
by kevspeed
Just a quick one,
What size wires are used in a Lambretta wiring harness,ie......bore,amp,or whatever?

Re: Wiring.

Posted: Sat Apr 08, 2017 10:18 am
by firekdp
The wiring varied slightly depending on the circuit, some of the sizes aren't available anymore. But the largest was 32/0.2, in PVC this would carry about 8.5A.
Modern thinwall, as it's name suggests has thinner insulation, so appears thinner but has a greater current carrying capacity of 16.5A.