Anyone used one? Any good or just another gimmick?
VHSH 30mm.
My carb is tilted so my long range tank fits but on full gas for any period of time it starts to starve itself. I either get tank modified or fit a snake head.
Sent from my iPhone using Tapatalk
Snake Head Carb tops
Used a couple on builds now and they are fine
Had snake head on for about a week. Maybe 100 miles or so. Taken carb to bits and slide and spring are full of black plastic grinding bits. So whilst it solves one problem it creates another.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- registered user
- Posts: 225
- Joined: Sun Jun 10, 2012 11:41 am
- Main scooter: Early Eibar Jet 200
- Contact:
Only put on after you have jetting sorted. It's a pain to take it on and off. I had one cause a cable to fray as it bends it at a sharp angle. I pulled it off after a season
Sent from my SM-G928W8 using Tapatalk
Sent from my SM-G928W8 using Tapatalk
------------------------------------------------------------------------------
carpe scooter diem
1974 Rally 200
1965 Li150
1963 TV175
1974 Eibar Jet200
carpe scooter diem
1974 Rally 200
1965 Li150
1963 TV175
1974 Eibar Jet200
I couldn't do that as the standard top fouled the tank etc and couldn't get a nice smooth run on the cable or the carb at a decent angle. I have convinced myself it's teflon and pistons are coated in it so it's not a massive issue.
All the other snake heads I've seen are nice smooth plastic. Mines quite rough.
Sent from my iPhone using Tapatalk
All the other snake heads I've seen are nice smooth plastic. Mines quite rough.
Sent from my iPhone using Tapatalk