Scooterotica

Just been over rayspeed for a race 6 plate and got told we won't be getting anymore as we sell 1 race for every 200 road clutches and he had asked them to drop the price and has had no reply so no more race clutches so I got a road version but Ray said he is checking and filing any that need it so it should just fit

Get the road clutch......fit the race plates/springs


Sent from my iPhone using Tapatalk

Hi Dan I would think he has a few spairs that would be the way to go but I'm sure the rad will handle my power

Sent from my SM-A320FL using Tapatalk

That is road not rad

Sent from my SM-A320FL using Tapatalk

Sent from my SM-A320FL using Tapatalk

Trying it out fits and works fine

Sent from my SM-A320FL using Tapatalk

garry inglis wrote:Trying it out fits and works fine

Sent from my SM-A320FL using Tapatalk

Got one on my TS1 225 - great bit of kit

Hi Alan this is my ts230 tried a reedspeed 5 plate but over 65 just slipped so this will sort it out

Sent from my SM-A320FL using Tapatalk

Fitted one to my scoot about a year ago. Had a weird issue where it wouldn't disengage. After some serious head scratching I discovered the thread on the top of the Xmas tree was too long and the centre button of the clutch was right up against it. Took it apart and compared to a second xmas tree and found the first one was about 3/8" longer. Swapped over and all worked fine.
Just one to look out for

Had the same x-mass tree issue. Both on my sil gp200 gearbox and my innocents pacemaker gearbox so I had to shim the sprocket 1.8mm instead of 1,2 that I originally had measured it to.


Sent from my iPhone using Tapatalk