Rayspeed 6 plate clutch

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
garry inglis
registered user
Posts: 1249
Joined: Tue Jul 21, 2015 8:04 pm
ebay user ID: garry52uk
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Thu Mar 09, 2017 2:04 pm

Just been over rayspeed for a race 6 plate and got told we won't be getting anymore as we sell 1 race for every 200 road clutches and he had asked them to drop the price and has had no reply so no more race clutches so I got a road version but Ray said he is checking and filing any that need it so it should just fit :mrgreen: :mrgreen: :mrgreen:

User avatar
drunkmunkey6969
Moderator
Posts: 4264
Joined: Sun Jan 04, 2009 1:42 pm
ebay user ID: sc00terotica
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Thu Mar 09, 2017 2:08 pm

Get the road clutch......fit the race plates/springs ;)


Sent from my iPhone using Tapatalk

User avatar
garry inglis
registered user
Posts: 1249
Joined: Tue Jul 21, 2015 8:04 pm
ebay user ID: garry52uk
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Thu Mar 09, 2017 2:11 pm

Hi Dan I would think he has a few spairs that would be the way to go but I'm sure the rad will handle my power

Sent from my SM-A320FL using Tapatalk

User avatar
garry inglis
registered user
Posts: 1249
Joined: Tue Jul 21, 2015 8:04 pm
ebay user ID: garry52uk
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Thu Mar 09, 2017 2:12 pm

That is road not rad

Sent from my SM-A320FL using Tapatalk

User avatar
garry inglis
registered user
Posts: 1249
Joined: Tue Jul 21, 2015 8:04 pm
ebay user ID: garry52uk
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Thu Mar 09, 2017 6:09 pm

ImageImage

Sent from my SM-A320FL using Tapatalk

User avatar
garry inglis
registered user
Posts: 1249
Joined: Tue Jul 21, 2015 8:04 pm
ebay user ID: garry52uk
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Thu Mar 09, 2017 6:10 pm

Trying it out fits and works fine

Sent from my SM-A320FL using Tapatalk

alanscottj
registered user
Posts: 972
Joined: Fri May 23, 2014 6:54 pm
Main scooter: Lambretta GP SS250 Casa
Contact:

Thu Mar 09, 2017 7:37 pm

garry inglis wrote:Trying it out fits and works fine

Sent from my SM-A320FL using Tapatalk
Got one on my TS1 225 - great bit of kit :D
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox 😎👍

User avatar
garry inglis
registered user
Posts: 1249
Joined: Tue Jul 21, 2015 8:04 pm
ebay user ID: garry52uk
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Thu Mar 09, 2017 7:39 pm

Hi Alan this is my ts230 tried a reedspeed 5 plate but over 65 just slipped so this will sort it out

Sent from my SM-A320FL using Tapatalk

User avatar
dapper
registered user
Posts: 1008
Joined: Tue Jan 27, 2009 5:30 pm
Main scooter: The Biriani Bullet
Location: Brighton (well Hove actually)
Contact:

Fri Mar 10, 2017 12:14 pm

Fitted one to my scoot about a year ago. Had a weird issue where it wouldn't disengage. After some serious head scratching I discovered the thread on the top of the Xmas tree was too long and the centre button of the clutch was right up against it. Took it apart and compared to a second xmas tree and found the first one was about 3/8" longer. Swapped over and all worked fine.
Just one to look out for ;)
Compact Toolbox Flywheel Holder

User avatar
kejj
registered user
Posts: 395
Joined: Wed Jan 07, 2009 10:23 pm
Contact:

Fri Mar 10, 2017 3:22 pm

Had the same x-mass tree issue. Both on my sil gp200 gearbox and my innocents pacemaker gearbox so I had to shim the sprocket 1.8mm instead of 1,2 that I originally had measured it to.


Sent from my iPhone using Tapatalk
________________________
Lambretta LiS150 1965 - MBGM RT195 w/MBGM Clubman & Keihin PWK28
Lambretta TV175 1962 - GranTurismo 200 w/MBGM Clubman & Dellorto PHBH 28
http://tv175.wordpress.com/

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 33 guests