Oil seal removal [emoji24]

[randylearner]

Evening all.

I'm pulling my hair out,

Trying to remove oil seal and can't budge the thing.

Got impact driver and broken a few pieces now. Had heat on it.

Started drilling pop out of seal

What's next


https://www.flickr.com/photos/151493805 ... ed-public/


Sent from my iPad using Tapatalk

[drunkmunkey6969]

You need to remove the for screws and the oil seal plate first......?

[randylearner]

Hello drunk photo attached, on Flickr

[randylearner]

That's what I'm trying to get off. Bloody thing won't budge.


Sent from my iPad using Tapatalk

[fairspares]

if you cant budge the 4 screws /bolts with a screwdriver or impact, get a long dot punch and tap the corner of the slot anti clockwise carefully or even a thin bar grind to fine point , this will loosen the screws then they will just come out .

[hendy]

Try this.

http://www.ilambretta.co.uk/forum/viewt ... 7&start=20

[randylearner]

if you cant budge the 4 screws /bolts with a screwdriver or impact, get a long dot punch and tap the corner of the slot anti clockwise carefully or even a thin bar grind to fine point , this will loosen the screws then they will just come out .

Will have a try. Fingers crossed.

[randylearner]

Try this.

http://www.ilambretta.co.uk/forum/viewt ... 7&start=20

Cheers hendy


Sent from my iPad using Tapatalk

[Chris in Margate]

Good bladed screwdriver. If it has a flat near the handle, even better. Grip this with adjustables or mole grips and keep strIking the handle end of the driver firmly whilst trying to turn screwdriver with grips.

[bazza3004]

Always managed to get them out with a decent impact driver myself . well once i had the impact driver set to the correct rotation