Bgm Clubman

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Darrell Taylor
Dealer
Posts: 818
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

Wed Feb 01, 2017 11:54 pm

mick1 wrote:I'm in York and have a Ron Moss clubman (possibly the last one made), which i'd be happy to loan out.

cheers thats 1 i dont have and local enough to collect ,,
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924

Darrell Taylor
Dealer
Posts: 818
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

Wed Feb 01, 2017 11:55 pm

hendy wrote:
Darrell Taylor wrote:i may be able to help with that dyno shootout might need a few willing loans of the odd pipe though ,,i have most clubmans already and a few i can beg steal and borrow hopefully ,can we start with a list of contenders.... ill go first with ANCILLOTTI CLUBMAN,,
Gori gp50
thats the one im keen to test......
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924

Darrell Taylor
Dealer
Posts: 818
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

Wed Feb 01, 2017 11:57 pm

Lambretta Sash wrote:Darrell Taylor wrote:
i may be able to help with that dyno shootout might need a few willing loans of the odd pipe though ,,i have most clubmans already and a few i can beg steal and borrow hopefully ,can we start with a list of contenders.... ill go first with ANCILLOTTI CLUBMAN

Can possibly get ron moss and reverse cone clubmans to you
cheers Sash , ill get plans made and be in touch
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924

Darrell Taylor
Dealer
Posts: 818
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

Thu Feb 02, 2017 12:02 am

id like to provide the test on 2 different set ups 1 with low ex duration and 1 with high ex duration to check there performance range at each end
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924

soosh
registered user
Posts: 1495
Joined: Sun May 03, 2009 2:01 pm
Main scooter: GP RS200 Iron barrel
Contact:

Thu Feb 02, 2017 7:44 am

Another good one will be the Kegra VW clubman which has a JL1 inside but I'd imagine very rare due to the cost of it. Don't know a person who's ever bought one.

Scooterdude
registered user
Posts: 772
Joined: Sat May 28, 2016 4:51 pm
Main scooter: Lambretta LI 125 S3
Location: Skaville
Contact:

Thu Feb 02, 2017 9:43 am

soosh wrote:
Scooterdude wrote:Just saw a comparison chart between GP50, Gori 50, and BGM. The GP 50 wins hands down on max power but although I hate to admit it the BGM has a much broader usable spread of power, I'll try to upload it on here if I can find it again.

On a side note are BGM in the process of introducing a new version of their clubman? Think I saw something somewhere about it ?
Who's dyno was this?
if you google "Gori gp50 dyno chart" at the top of the page there is a link to the Lambretta club GB site and some geezer saying about Dean at Riminni sending him some charts....well it's all on there bud.

soosh
registered user
Posts: 1495
Joined: Sun May 03, 2009 2:01 pm
Main scooter: GP RS200 Iron barrel
Contact:

Thu Feb 02, 2017 12:00 pm

Cheers,just taken a look. It describes the GP50 as quite peaky as I guess that's what spec motor it was used on.
I found on mine it had a huge wide spread of torque which pulled me and my lady (who is almost 6ft with massive air bags) on 4.7,ok I've got a cyclone but even in 5th slowing down to 50 and then opening the throttle it pulled so well and deff not peaky but then I don't have big exhaust timing. I'd say it probably the best pipe I've had and even more grunt than the JL3 I had on it a while ago. Anyway,hopefully Darrell will do some good testing on them all with different spec motors,be interesting to see.

User avatar
coaster
registered user
Posts: 3678
Joined: Wed Jan 07, 2009 12:35 pm
Location: London and Norfolk
Contact:

Thu Feb 02, 2017 1:58 pm

I have a brand new BGM clubman sitting on a shelf which I would be happy to loan for the test. I bought it from someone on FB and it has a factory applied silver finish so I suspect it is an early version. Just let me know and I'll get it in the post.

User avatar
ktmh5
registered user
Posts: 320
Joined: Fri Jan 13, 2012 7:56 pm
ebay user ID: ktmh5
Main scooter: GP225 Mugello
Location: Leeds / Wakefield
Contact:

Thu Feb 02, 2017 5:03 pm

coaster wrote:I have a brand new BGM clubman sitting on a shelf which I would be happy to loan for the test. I bought it from someone on FB and it has a factory applied silver finish so I suspect it is an early version. Just let me know and I'll get it in the post.
I thought the early versions all came unpainted, may be wrong, thought it was later ones which were painted.

User avatar
Donnie
registered user
Posts: 1505
Joined: Mon Jun 15, 2009 6:56 pm
Main scooter: Lambretta Eibar Series 2
Location: Bedford, UK
Contact:

Thu Feb 02, 2017 6:19 pm

my v3 came unpainted and thats only a couple of months ago
Donnie.

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 9 guests