RT225 25 Dellorto Clubman?

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Post Reply Previous topicNext topic
Lamaddict
registered user
Posts: 854
Joined: Wed Jan 07, 2009 8:35 pm
Contact:
Contact Lamaddict

Thinking about this set up. Anyone running one the same or similar?
Top
Timbo
registered user
Posts: 1276
Joined: Tue Mar 03, 2009 2:46 pm
Main scooter: SX200 and GP230 RT
Location: Luton area.....
Contact:
Contact Timbo

I ran one on a 26 delly but changed to a 28 and get a much better performance. BGM clubman as well.
Top
Timbo
registered user
Posts: 1276
Joined: Tue Mar 03, 2009 2:46 pm
Main scooter: SX200 and GP230 RT
Location: Luton area.....
Contact:
Contact Timbo

I ran one on a 26 delly but changed to a 28 and get a much better performance. BGM clubman as well.
Top
Mark ULC
registered user
Posts: 325
Joined: Fri Apr 26, 2013 2:02 pm
Main scooter: LI Series 2
Contact:
Contact Mark ULC

I run this but with an NK road/rally pipe. Runs well, economical when not thrashed. The pipe gives good torque, max bhp and torque at 6200rpm, runs out at 7000rpm so 25 mm dellorto enough for this. If I put a bgm clubman on I would go to a bigger carb to feed higher rpm. Be interest to know how much better a 30mm is than a 28mm for an out of the box RT kit.
Top
Post Reply Previous topicNext topic

Return to “Lambretta Tech”

  • Information

  • Who is online

    Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 23 guests

Powered by phpBB™ • Design by PlanetStyles