Hello all
I'm getting fed up with the vibration coming from my old worries 2 handlebars / headset at certain speeds it's quite painful after awhile on long journeys does anybody make a upgrade rebuild kit , I know MBD does a late series 3 one . Any ideas
Thanks
Lambretta series 2 headset rebuild
- EddieStone
- registered user
- Posts: 432
- Joined: Mon Aug 17, 2015 4:13 pm
- Main scooter: Lambretta Li 150
- Contact:
Also the dreaded twisted crank
- Burnside
- registered user
- Posts: 315
- Joined: Wed Feb 22, 2012 9:22 pm
- Main scooter: Lambretta TV200
- Location: Norwich
- Contact:
My Eibar S2 does suffer from headset vibrations at around 3-4k revs but clears once it gets into the power band, but I put that down to the Scootopia engine mounts. Simple solution is to keep it in the power band
Thanks guys
I'm rebuilding the engine over the winter so I'll change the mounts etc at 60mph it's fine at 50mph horrible
I'm rebuilding the engine over the winter so I'll change the mounts etc at 60mph it's fine at 50mph horrible