Lambretta series 2 headset rebuild

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
watto66
registered user
Posts: 82
Joined: Fri Jul 06, 2012 5:06 pm
Contact:

Hello all

I'm getting fed up with the vibration coming from my old worries 2 handlebars / headset at certain speeds it's quite painful after awhile on long journeys does anybody make a upgrade rebuild kit , I know MBD does a late series 3 one . Any ideas


Thanks
User avatar
HxPaul
registered user
Posts: 1110
Joined: Fri Dec 06, 2013 1:58 pm
Main scooter: lambretta Li 150
Location: Halifax,Yorkshire
Contact:

It may not be the headset,if the vibration is bad you should look at the engine mounts/silent blocks.
User avatar
EddieStone
registered user
Posts: 432
Joined: Mon Aug 17, 2015 4:13 pm
Main scooter: Lambretta Li 150
Contact:

Also the dreaded twisted crank
User avatar
Burnside
registered user
Posts: 315
Joined: Wed Feb 22, 2012 9:22 pm
Main scooter: Lambretta TV200
Location: Norwich
Contact:

My Eibar S2 does suffer from headset vibrations at around 3-4k revs but clears once it gets into the power band, but I put that down to the Scootopia engine mounts. Simple solution is to keep it in the power band :twisted:
watto66
registered user
Posts: 82
Joined: Fri Jul 06, 2012 5:06 pm
Contact:

Thanks guys


I'm rebuilding the engine over the winter so I'll change the mounts etc at 60mph it's fine at 50mph horrible
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot] and 22 guests