Indian Vijay/GP 150 carb manifold

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
kevspeed
registered user
Posts: 728
Joined: Sun Jan 18, 2009 11:07 am
Contact:

A bit of a problem with an Indian manufactured 150.
At some stage the originally fitted 'Mikarb' and inlet manifold has been removed,and an Italian GP 150 inlet fitted along with a 'Jetex' 22mm carb.
With this existing set up the inlet manifold sits too close to the engine mount,causing the carb to be fitted on an odd angle.
I assume the barrel studs are positioned differently to the barrels meant for the original style Dellorto/Spaco/Jetex carbs and manifolds.
Anybody got an easy fix for this problem?
lambro
registered user
Posts: 476
Joined: Wed Jan 07, 2009 7:41 pm
Contact:

Get a remade 150 manifold from Scootopia, fitted a few now and they clear the big engine mounts no problem,
The Indian one you have seem to only fit with the small engine mounts.

Shaun.
User avatar
kevspeed
registered user
Posts: 728
Joined: Sun Jan 18, 2009 11:07 am
Contact:

The original Indian one has been replaced with a genuine Italian item but the problem persists. Is the remade Scootopia manifold different to the genuine Italian manifold?
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot], Google [Bot], Semrush [Bot] and 15 guests