Disappointing RB20.

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
10 inch Terror
registered user
Posts: 1447
Joined: Tue Jun 29, 2010 9:17 pm
Xbox live gamer tag: No.
Playstation gamer tag: PLEASE!
Main scooter: Lambretta LI Imola 185
Location: Farnborough Hampshire
Contact:

Hi all, I finally got one of my recent projects on the road today and I was left very underwhelmed. It's an RB20 with transfers matched but otherwise standard. I'm running 17/47 sprockets on a Italian Pacemaker box, NK Rally, 30mm Dellorto and mid weight flywheel. 1st and 2nd seem fine but in 3rd and 4th is completely gutless and will literally die at anything over half throttle. I got the carb supposedly already jetted to suit. Would a badly set up carb cause these symptoms? I'm pretty gutted by it all if I'm honest I was really hoping it'd be a fun ride. Any help greatly appreciated. Thanks in advance Pete.
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

What is the jetting spec?


Sent from my iPhone using Tapatalk
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
10 inch Terror
registered user
Posts: 1447
Joined: Tue Jun 29, 2010 9:17 pm
Xbox live gamer tag: No.
Playstation gamer tag: PLEASE!
Main scooter: Lambretta LI Imola 185
Location: Farnborough Hampshire
Contact:

drunkmunkey6969 wrote:What is the jetting spec?


Sent from my iPhone using Tapatalk
I got it from a dealer a few years ago and as far as I know it's as per standard RB20 spec. I just fitted it and never checked what was in it. I just put the scoot away earlier and haven't looked at anything. Do you think I should strip it down and check?
User avatar
wack 63
registered user
Posts: 1254
Joined: Fri Nov 27, 2009 9:33 pm
Main scooter: '71 GP TS1
Location: Lincs
Contact:

I've just fitted a VHSH30 on an RB20 that is supposed to be jetted to suit from AF's. It has
U16 needle
DQ267
170 main
60/B48 idles
60 choke
3.0 float valve
50 slide
I've not rode it yet but it starts and revs fine although the main seems large plus the jetting is not the same as in the RB instructions?
Donnie
registered user
Posts: 1038
Joined: Mon Jun 15, 2009 6:56 pm
Main scooter: Lambretta Eibar Series 2
Location: Bedford, UK
Contact:

There's no such thing as a carb jetted right out of the box, at best it's going to be in the ballpark!
Donnie.
10 inch Terror
registered user
Posts: 1447
Joined: Tue Jun 29, 2010 9:17 pm
Xbox live gamer tag: No.
Playstation gamer tag: PLEASE!
Main scooter: Lambretta LI Imola 185
Location: Farnborough Hampshire
Contact:

Donnie wrote:There's no such thing as a carb jetted right out of the box, at best it's going to be in the ballpark!
I agree, and was expecting to have to adjust, or swap bits. This though seems a million miles out.
hendy
registered user
Posts: 859
Joined: Mon Jul 07, 2014 10:34 am
Main scooter: lambretta li 125
Location: Tyne and Wear
Contact:

I bought a phbh30 jetted for my gt186.

I've come down from 135 to 125 on the main and it's still too rich.

It did run though.
Donnie
registered user
Posts: 1038
Joined: Mon Jun 15, 2009 6:56 pm
Main scooter: Lambretta Eibar Series 2
Location: Bedford, UK
Contact:

10 inch terrors runs too though, so like you he will need to make adjustments.
Donnie.
10 inch Terror
registered user
Posts: 1447
Joined: Tue Jun 29, 2010 9:17 pm
Xbox live gamer tag: No.
Playstation gamer tag: PLEASE!
Main scooter: Lambretta LI Imola 185
Location: Farnborough Hampshire
Contact:

I've had the plug out, and although I didn't do many miles yesterday, it seems a pretty good colour. The photos don't really show it, but it's between a chocolate colour, and black. This suggests to me that it's not that far out?
Image
Image
Thoughts, please.
User avatar
HxPaul
registered user
Posts: 1110
Joined: Fri Dec 06, 2013 1:58 pm
Main scooter: lambretta Li 150
Location: Halifax,Yorkshire
Contact:

It looks rather rich.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot], Google [Bot] and 27 guests