Is there meant to be larger gap between thelegsheilds and front strut? I ask because im dry building an indian series 2 and with the whole lot tightened up i have a gap of about half an inch.i have tried 2sets of legsheilds with the same result. I have been told that there Re shaped rubbers for this but i havent come across these?
Ta sef
Series 2 legshield gap.
-
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
- wack 63
- registered user
- Posts: 1254
- Joined: Fri Nov 27, 2009 9:33 pm
- Main scooter: '71 GP TS1
- Location: Lincs
- Contact:
Ser 1/2 use thicker washers http://www.scooterrestorations.com/lamb ... 5mm-thick/ Try fitting longer bolts to pull the legshields down then fit the runners one at a time.