Series 2 legshield gap.

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
sydduckett
registered user
Posts: 1900
Joined: Wed Jan 14, 2009 12:21 am
Contact:

Is there meant to be larger gap between thelegsheilds and front strut? I ask because im dry building an indian series 2 and with the whole lot tightened up i have a gap of about half an inch.i have tried 2sets of legsheilds with the same result. I have been told that there Re shaped rubbers for this but i havent come across these?
Ta sef
User avatar
wack 63
registered user
Posts: 1254
Joined: Fri Nov 27, 2009 9:33 pm
Main scooter: '71 GP TS1
Location: Lincs
Contact:

Ser 1/2 use thicker washers http://www.scooterrestorations.com/lamb ... 5mm-thick/ Try fitting longer bolts to pull the legshields down then fit the runners one at a time.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 20 guests

cron