Just fitted a casa 185,...now for the carb, 25mm phbl. Should i re route the throttle cable to the same side as the gear cables, then thru the gap between toolbox and airbox? Anyone got a picture of their set up please?
Thanks chaps
25mm phbl fitting advice
I put the throttle cable in the original way for a PHBL 25 but the air box was in the way, so I took it out. Getting the 25 in with the air box in seems a bit too tight for me but maybe I'm missing something.
-
- registered user
- Posts: 796
- Joined: Sat May 28, 2016 4:51 pm
- Main scooter: Lambretta LI 125 S3
- Location: Skaville
- Contact:
We've just fitted a PHBH 28 with the air box, I found I needed a right angled cable adapter (less than a tenner from Rayspeed) it makes for a nice compact job. Of course you can get a "snake head" carb top to give you even more clearance if needed.Lamaddict wrote:I put the throttle cable in the original way for a PHBL 25 but the air box was in the way, so I took it out. Getting the 25 in with the air box in seems a bit too tight for me but maybe I'm missing something.
- HxPaul
- registered user
- Posts: 1110
- Joined: Fri Dec 06, 2013 1:58 pm
- Main scooter: lambretta Li 150
- Location: Halifax,Yorkshire
- Contact:
A phbl 25 is designed to run through the airbox,you can also put a 90 degree solid bend on the throttle cable,but it will fit just as well with the cable straight in through the top of the carb.https://www.google.co.uk/search?q=image ... OaOnYZoMHM:Lamaddict wrote:I put the throttle cable in the original way for a PHBL 25 but the air box was in the way, so I took it out. Getting the 25 in with the air box in seems a bit too tight for me but maybe I'm missing something.