Carbon fibre legshields
-
- registered user
- Posts: 79
- Joined: Sun Oct 09, 2011 1:47 am
- Main scooter: lambretta series 2
- Contact:
Anyone fitted pm carbon fibre legshields? Dry building the gp and the legshields rub on the main frame tube stopping me from dropping them low enough on the steering stem to have a gap between them and the handlebars. If I put double thickness anti vibration washers on the struts it helps but it still doesn't end up with a gap.
I removed the forktube clamp and refitted it in the correct position on mine, This was the only way to make them fit with neat gaps , infact the clamp fell off whilst pulling the legshields around during the dry build,
Looks like i will have fun fitting mine
-
- registered user
- Posts: 79
- Joined: Sun Oct 09, 2011 1:47 am
- Main scooter: lambretta series 2
- Contact:
My clamp isn't fitted, I'll sort it when I'm happy with the positioningthesx200 wrote:I removed the forktube clamp and refitted it in the correct position on mine, This was the only way to make them fit with neat gaps , infact the clamp fell off whilst pulling the legshields around during the dry build,