Servetta Motoplat Stator Wires

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Lamaddict
registered user
Posts: 854
Joined: Wed Jan 07, 2009 8:35 pm
Contact:

It's running on points but where do the 2 yellow and 1 red wire go? I'm trying to put on a new regulator but can't work out where they go and what they do. The other wire is green and I know that's for the ignition etc.
Muppet
registered user
Posts: 1279
Joined: Thu Sep 16, 2010 9:54 pm
Main scooter: SX 150 running in

wires to a motoplat regulator rectifier then jbox to loom
C’est la vie
Lamaddict
registered user
Posts: 854
Joined: Wed Jan 07, 2009 8:35 pm
Contact:

I get that but I don't have the Motoplat Rectifer but another type to try and use. If I knew what the others wires did it would be great and once I know this I should be able to work it out.
User avatar
wack 63
registered user
Posts: 1254
Joined: Fri Nov 27, 2009 9:33 pm
Main scooter: '71 GP TS1
Location: Lincs
Contact:

If you want a Motoplat reg , a mate may have one or two.
User avatar
Pepot
Posts: 73
Joined: Sun Aug 05, 2012 10:45 pm
Main scooter: servetta LI150 serieIII GT186
Contact:

If you want to run it on A/C, forget the red one and isolate it, put one yelow to ground and the other to an AC regulator. If you wish to run DC, buy a wassel regulator,join the yellow wires fronm stator with the yellow of regulator and isolate the red one from stator.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot], Google [Bot] and 23 guests