Thoughts on Mugello 186 port timings
-
ulyssescale
- registered user
- Posts: 89
- Joined: Fri Oct 16, 2009 8:42 pm
- Location: San Francisco, California USA
- Contact:
Alright, so now pump that 6,500 rpm number into the gearing calculator. You think it'll make that 3rd>4th jump on a grade? The first leg of her trip will be hills and then gets flat.
A chicken ain't nothing but a bird.
-
Grumpy225
- registered user
- Posts: 650
- Joined: Sat Nov 24, 2012 7:59 am
- Main scooter: Gori200, rt195, ld150,rb20
- Location: Bakersfield, CA
- Contact:
ulyssescale wrote:Alright, so now pump that 6,500 rpm number into the gearing calculator. You think it'll make that 3rd>4th jump on a grade? The first leg of her trip will be hills and then gets flat.
I picture a lot of 3rd gear screaming at 48mph
-
dirtyhandslopez
- registered user
- Posts: 465
- Joined: Sun Mar 22, 2009 5:15 am
- Location: Richmond Virginia, USA
- Contact:
I believe I would set her up with a tv rodded suzi 190. Plenty of pull, won't rev to high, easy to get rings/oversize piston in the middle of no where if necessary.
Blow the muggy up and you're done.
Keep it simple, she's a lot of miles to go.
Blow the muggy up and you're done.
Keep it simple, she's a lot of miles to go.
That's not going anywhere...
-
siobhanellis
- registered user
- Posts: 22
- Joined: Mon Feb 09, 2009 4:02 am
- Location: Sydney, NSW, Australia
- Contact:
As many of you know, the ride went well.
I had a cruising speed of between 55 and 60mph, with a top (on the flat) of about 70mph.
22mm Dellorto, Ancillotti Exhaust.
Siobhan
I had a cruising speed of between 55 and 60mph, with a top (on the flat) of about 70mph.
22mm Dellorto, Ancillotti Exhaust.
Siobhan
Siobhan
-------------
It's not a bloody vespa!
-------------
It's not a bloody vespa!
-
Grumpy225
- registered user
- Posts: 650
- Joined: Sat Nov 24, 2012 7:59 am
- Main scooter: Gori200, rt195, ld150,rb20
- Location: Bakersfield, CA
- Contact:
siobhanellis wrote:As many of you know, the ride went well.
I had a cruising speed of between 55 and 60mph, with a top (on the flat) of about 70mph.
22mm Dellorto, Ancillotti Exhaust.
Siobhan
I'm glad to hear that. I was following the photos and lots of emails with Eric about the head and carb issue. I still can't believe that bike made the trek with only about 20 min break-in time on it.