Who welds and re- taps casaings?
Looking to get my Jet 200 casings welded and re-tapped need about 4 studs done , couple have been re-tapped and oversized and these are now needing repaired again and can't (and don't want to) go any bigger, especially one of the larger exhaust bracket studs. Is there anyone does this with a reasonably quick turnaround?
- Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
Could you do it yourself with a Durafix type solution?
CakeAndArseParty
looks too tricky to 'fill n drill' Amazing stuff though.
Chris Sadd engineering
-
- registered user
- Posts: 450
- Joined: Thu Oct 25, 2012 2:49 am
- Main scooter: GP-1971-Ts230/S2-1960-Ts230
- Contact:
What size are these exhaust threads ATM ?
You'll be surprised by the tap size used for a 8mm helicoild repair m8
You'll be surprised by the tap size used for a 8mm helicoild repair m8
I would have thought any of the major dealers would do it however dont k
limit your search to scooter only shops plenty of motorcycle or car engineering places can do this type of work
limit your search to scooter only shops plenty of motorcycle or car engineering places can do this type of work
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm