One for the electrical boffins.
I want to loose the points on my series one, but would like to keep the 6volt lighting system.
Can I just swap the 12v lighting coils for 6v and wire them up the same on the stator?
Will the original 6v rectifier designed for a 4 pole stator cope with the output?
6v BGM Stator
- Arch_Stanton
- registered user
- Posts: 44
- Joined: Sun Jan 18, 2009 3:13 pm
- Contact:
Firstly that seems like a retrograde conversion
secondly changing everything over just seems like a long way around a problem
if i4 was me id get a 12v to 6v step down converter or use a 12v dc stator and a 12/24v to 6v wassell type unit
if your worried about looks then get an old rectifier/ regularor hollow it out and fit what ever you want inside
ouh and good luck
secondly changing everything over just seems like a long way around a problem
if i4 was me id get a 12v to 6v step down converter or use a 12v dc stator and a 12/24v to 6v wassell type unit
if your worried about looks then get an old rectifier/ regularor hollow it out and fit what ever you want inside
ouh and good luck
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm