Jetting following reed valve- expected increase, but really!
-
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
My scoot was dynoed by Readspeed and was running a 108 main (muggy 198), power jet was always closed, recently fitted reed valve and was expecting to up jet as recommended. Tonight, I have managed to up jet to a 118 with power jet open 3/4 a turn. Scoot is running fantastic, nippy low down as before, sits nice at 65. I'm not looking for a problem but does this sound quite a large up jet? Or is it about right? (Plug chops to be done tomorrow)
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox ππ
- Speed Demon
- Dealer
- Posts: 392
- Joined: Mon Feb 02, 2009 12:09 pm
- Contact:
Yes, expect a massive upjet on reed.
Get to SULK
-
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
So that's my main up jetted, will my needle/atomiser etc need changing too?Speed Demon wrote:Yes, expect a massive upjet on reed.
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox ππ
- coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
The dyno is the best place to get it set up but found that it was the main and needle position that needed changing on my Indian 225 when I fitted an MB reed block to it with holes in the piston and a finger port added. I believe it is compensation for poor airflow as the revs rise or somesuch
-
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
Main jet has been increased from a 108 up to a 122, PowerJet is 3/4 open and still no sign of getting boggy at wot. Plug is still a light shade of chocolate. Going to borrow some bigger main jets off a mate and see what is the biggest I can get it to then work back down.
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox ππ
-
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
Up to 128 main now! Plug is looking nice though
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox ππ
-
- registered user
- Posts: 450
- Joined: Thu Oct 25, 2012 2:49 am
- Main scooter: GP-1971-Ts230/S2-1960-Ts230
- Contact:
Ordered my new 30mm PHBH with 125main for startersalanscottj wrote:Up to 128 main now! Plug is looking nice though
Should be here Monday
What you got timing set at Alan?
-
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
Honestly can't remember mate, pete at PSL set it last time I had scoot dynoed, 17 or 18 rings a bell ?Norrie Bodge wrote:Ordered my new 30mm PHBH with 125main for startersalanscottj wrote:Up to 128 main now! Plug is looking nice though
Should be here Monday
What you got timing set at Alan?
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox ππ
-
- registered user
- Posts: 450
- Joined: Thu Oct 25, 2012 2:49 am
- Main scooter: GP-1971-Ts230/S2-1960-Ts230
- Contact:
Ok cheers m8alanscottj wrote:Honestly can't remember mate, pete at PSL set it last time I had scoot dynoed, 17 or 18 rings a bell ?Norrie Bodge wrote:Ordered my new 30mm PHBH with 125main for startersalanscottj wrote:Up to 128 main now! Plug is looking nice though
Should be here Monday
What you got timing set at Alan?
I've set mine at 18 ill see how it goes