GP rear frame grill hole size needed

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
RobD
registered user
Posts: 74
Joined: Wed Jan 07, 2009 2:27 pm
Contact:

I'm looking for a favour, I need the dimensions of the rear frame grill holes and their distance from the centre line of the frame. My Italian GP has been repaired and that part came from an Indian donor which doesn't have the holes and so need to drill them before painting it. I've found the following pic of the area (though it's an SX in the pic). Cheers,Rob

Image
Daggs
registered user
Posts: 776
Joined: Wed Jan 07, 2009 1:23 pm
Location: Addington Kent
Contact:

First off your picture isn't working.
However I've assumed you mean the large holes that accept the rear frame badge holder.
I measured up my LiS frame i'm working on. The holes are 15mm and the centres are 93mm apart. They are also approx. 12mm UP from the sprint rack area of the frame.
Absolute accuracy is not vital for these holes as i'm sure you are aware.
RobD
registered user
Posts: 74
Joined: Wed Jan 07, 2009 2:27 pm
Contact:

That's great many thanks.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot] and 25 guests