Gori - How do they do that?
- Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
Fit a quart into a pint pot. I mean how do they get a 200 barrel to fit a small block? I know you can machine the spigot down. But what about the spacing of the rods? There was an Indian kit that did much the same. But that involved twisting the rods and drilling out the holes in the fins as far as I can remember. Never seemed like a particularly good idea to me.
- purple_pill67
- registered user
- Posts: 228
- Joined: Mon Dec 05, 2011 3:29 pm
- Main scooter: Jet200
- Location: Gloucester
- Contact:
Its not a proper 200 small block though is it?!? Just a small block bored out as far as possible?
yes it is a proper 200. 200 barrel, spigot turned down to fit 150 casings, stud holes in barrel opened up to fit, and the studs wiggled onto the barrel, and a head made to suit. ive seen 1 on an Italian import , they call them (pardon my Italian) "bambino duecentino". this was an old style conversion, the Gori is along the same lines I think (never seen one) hast la fuego dedion button.purple_pill67 wrote:Its not a proper 200 small block though is it?!? Just a small block bored out as far as possible?
- purple_pill67
- registered user
- Posts: 228
- Joined: Mon Dec 05, 2011 3:29 pm
- Main scooter: Jet200
- Location: Gloucester
- Contact:
Ah right, learn summat new everyday