Thanks for the reply Martin.
The hose has a nut which tightens onto the banjo.
The nut will not pass down the side of the clamp.
I shall try and take a photo.
God knows how you put it up on here. I am not the most gifted when it comes to technology
Robbie
Hydraulic hose route on Spanish Li150 S2
-
- registered user
- Posts: 394
- Joined: Thu Jan 09, 2014 7:34 pm
- Main scooter: li150
- Location: York
- Contact:
-
- registered user
- Posts: 394
- Joined: Thu Jan 09, 2014 7:34 pm
- Main scooter: li150
- Location: York
- Contact:
How do i add photos on an android phone
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
Use tapatalk app it's free
-
- registered user
- Posts: 394
- Joined: Thu Jan 09, 2014 7:34 pm
- Main scooter: li150
- Location: York
- Contact:
This is my headset.
The hole will not pass by the clamp. Have i built it wrong? Any ideas?
Or should i just undo the clamp fit the cable then reattach the clamp.
Sent from my SM-J320FN using Tapatalk
The hole will not pass by the clamp. Have i built it wrong? Any ideas?
Or should i just undo the clamp fit the cable then reattach the clamp.
Sent from my SM-J320FN using Tapatalk
-
- registered user
- Posts: 394
- Joined: Thu Jan 09, 2014 7:34 pm
- Main scooter: li150
- Location: York
- Contact:
God im a technophobe...took me ages to navigate tapatalk. Still not really sure what im doing with it.
- corrado
- Dealer
- Posts: 2588
- Joined: Thu Jan 08, 2009 1:12 am
- Main scooter: Lambretta GP
- Location: Top of Blackpool Tower
- Contact:
I've sent a message to the last guy who fitted it this way but from those pics it looks like you'll have to unbolt the clamp to feed it through. Maybe file a groove on the clamp for more clearance.
-
- registered user
- Posts: 394
- Joined: Thu Jan 09, 2014 7:34 pm
- Main scooter: li150
- Location: York
- Contact:
Thank you again for the reply Martin.
Yeah i have been pondering it.
I wasnt sure if I could grind the clamp a little bit.
I shall unbolt it and try trim a bit off.
Its very tight all the way round and will not fit down the side anywhere...flumming thing.
Hey ho...one step forward two steps back.
I will restore this scooter....if it kills me
Taken 14 years so far
Yeah i have been pondering it.
I wasnt sure if I could grind the clamp a little bit.
I shall unbolt it and try trim a bit off.
Its very tight all the way round and will not fit down the side anywhere...flumming thing.
Hey ho...one step forward two steps back.
I will restore this scooter....if it kills me
Taken 14 years so far
-
- registered user
- Posts: 450
- Joined: Thu Oct 25, 2012 2:49 am
- Main scooter: GP-1971-Ts230/S2-1960-Ts230
- Contact:
Get the dremmel out & take a bit off the clamp/headset
I’ll add some pictures tonight from my PC
I’ll add some pictures tonight from my PC
-
- registered user
- Posts: 450
- Joined: Thu Oct 25, 2012 2:49 am
- Main scooter: GP-1971-Ts230/S2-1960-Ts230
- Contact:
Knew I’d posted b4
Look here should help m8 -> viewtopic.php?f=7&t=38504
Look here should help m8 -> viewtopic.php?f=7&t=38504