I spent a while cleaning up the steels with wire wool and compared them with a spare set. I could not see any difference, no warping etc. so put them back in.I hope you replaced the steels as well.
Cheers
Ben
I spent a while cleaning up the steels with wire wool and compared them with a spare set. I could not see any difference, no warping etc. so put them back in.I hope you replaced the steels as well.
You were right GoldenEye, I didn't replace the steels and the clutch never worked correctly. Always biting and never releasing properly. I put that problem to one side as I've been converting the scoot to a Group 6 style racer with drop bars. Inspired by many of the scoots on this site.goldeneye wrote:I hope you replaced the steels as well.