Tourer rb20 engine

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
ArKaTxU
Dealer
Posts: 340
Joined: Wed Jan 07, 2009 8:26 am
Main scooter: TV175 64-Jet200 68-Jet200 82
Location: Rias Baixas
Contact:

Is there any posibility to quit from cylinder base 0'5/1mm like in TS1 and do the kit more tourer?
pasner
registered user
Posts: 130
Joined: Wed Jan 07, 2009 1:43 pm
Location: Basque Country
Contact:

coaster wrote:
pasner wrote:An rb20 kit came for free to my hands with a jl supertourer. Not a friend of revy engines so, what could I do with this kit to trasform it to a more tourer kit. Any Ideas?
I'm no expert but I wouldn't a longer rodded crank (110 or 115) allow you to play with base packers and recessing the head to tame the port timings a bit?
Does someone have any experience with longer rodded cranks ( 62x116 is not an option for me, dont wan to use the grinder on this engine case). And what about the exhausts, I though the supertourer was a tourer exhaust, more tourer than a nk road, isnt it?
Adam_Winstone
registered user
Posts: 1693
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:

Supertourer has little pull at lower revs but good mid range and over-rev, whether this matches your idea of a tourer is more about what you want from a road motor. At low revs the JL3 stomps all over it.

Adam
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 15 guests