carb setup for rt230 reedvalve

[biddy]

Hi I was running a rt230 bgm exhaust ,30 del, 121 main ,pilot 58 ,x7,av266 now the problem is after putting an reedvalve on it now and was wondering what I up jet to running same set up now but a 140 main .hear some where you go up 20% on main jet would this be right
Many thanks of help

[Timbo]

Have you asked MB?

[Adam_Winstone]

Biddy, you getting this ready for Shipston?

[biddy]

No Adam not going shipton too much going on over here at the moment next one will be malton af thing . Guinea and hickey are going

[mickjr]

email him threw his own shop email,he has a rt lambretta group on facebook,which he gets back to you pretty quick

http://www.lambrettaspares.com/info/lam ... rs+53.html

[SpanishSX200]

I have that kit!
PHBH 30
Pilot 50
Slide 40
Choke 70
X13 needle 2nd clip
350 float/needle valve
AV 268 atomiser
130 main

Bit rich around quarter throttle but clean as when giving it some!

Ron Moss clubman

Simon

[Adam_Winstone]

^... Simon, nice answer

Biddy, OK, I'll see you when I see you x

Adam