Misano Supercases.....
Tino replied to my e-mail and as far as i know they have been available since november
-
- registered user
- Posts: 22
- Joined: Mon Feb 09, 2009 4:02 am
- Location: Sydney, NSW, Australia
- Contact:
I have a Targa No 32.
It is, I must admit, nicer than the Misano. However, it is considerably more expensive. I think the Misano is actually good value. It's much smoother than a normal single cylinder, and you don't loose as much power going up hills, or on the flat, as you do with a normal single. Tino was riding a standard case with the exact same set up as me, or near as damn it, and I'd get up hills much better than he would. It's also much smoother, so it should be able to rev higher I think, and there is plenty of meat on the casing for porting if you want to do that.
He's been waiting for new rear brake cams to be made, and they have been done. I have an order in for 3 cases (I've started a business reselling Tino's parts) and he told me last week that he would be packing my order in two weeks.
So, very soon is the answer on availability.
Siobhan
It is, I must admit, nicer than the Misano. However, it is considerably more expensive. I think the Misano is actually good value. It's much smoother than a normal single cylinder, and you don't loose as much power going up hills, or on the flat, as you do with a normal single. Tino was riding a standard case with the exact same set up as me, or near as damn it, and I'd get up hills much better than he would. It's also much smoother, so it should be able to rev higher I think, and there is plenty of meat on the casing for porting if you want to do that.
He's been waiting for new rear brake cams to be made, and they have been done. I have an order in for 3 cases (I've started a business reselling Tino's parts) and he told me last week that he would be packing my order in two weeks.
So, very soon is the answer on availability.
Siobhan
Siobhan
-------------
It's not a bloody vespa!
-------------
It's not a bloody vespa!
-
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
Opened up the engine after 7000km, with Tino present, and noticed one thing that will be incorporated into the production machines.
Can you expand on your comment? What's the one thing ???
Can you expand on your comment? What's the one thing ???
Compact Toolbox Flywheel Holder
-
- registered user
- Posts: 22
- Joined: Mon Feb 09, 2009 4:02 am
- Location: Sydney, NSW, Australia
- Contact:
The screw that holds the kickstart piston into the kickstart shaft was just catching on the casing. Just had to grind about 1mm off that part of the casing and no problem.
Siobhan
-------------
It's not a bloody vespa!
-------------
It's not a bloody vespa!
-
- registered user
- Posts: 22
- Joined: Mon Feb 09, 2009 4:02 am
- Location: Sydney, NSW, Australia
- Contact:
Available now. Take a look on https://www.facebook.com/lambrettaconsessionaires
If you want to hear it start and run (first time in many months as I rebuilt the scoot after it got destroyed on North to South): https://www.facebook.com/photo.php?v=10 ... 8643606952
(sorry, being bit butch in that video )
Pics will be available soon on www.lambrettaparts.com.au
These are the first 3 commercially available in the wild.
Siobhan
If you want to hear it start and run (first time in many months as I rebuilt the scoot after it got destroyed on North to South): https://www.facebook.com/photo.php?v=10 ... 8643606952
(sorry, being bit butch in that video )
Pics will be available soon on www.lambrettaparts.com.au
These are the first 3 commercially available in the wild.
Siobhan
Siobhan
-------------
It's not a bloody vespa!
-------------
It's not a bloody vespa!
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
I guess the burning question is how much are they going to be in the UK?
Turn On, Tune In, Cop out!
- jonashford
- registered user
- Posts: 445
- Joined: Wed Oct 20, 2010 4:47 pm
- Main scooter: Lambretta SX RB235
- Location: GRIMSBY
- Contact:
they do look good but I will be waiting at least a year before even dreaming of getting a misano case, look wat happened with the targa. the teething problems are only just getting sorted out after a long time.
Siobhan has updated her Facebook page price is $3790 + GST. In English it's around £2100 +vat? That includes crank, mag flange, Varitronic and other things. Can't afford one at the moment but definitely might get in the future.
-
- registered user
- Posts: 22
- Joined: Mon Feb 09, 2009 4:02 am
- Location: Sydney, NSW, Australia
- Contact:
Remember that shipping out to, and back from, Australia costs a fortune, but then again we do not have 20% VAT.
Siobhan
-------------
It's not a bloody vespa!
-------------
It's not a bloody vespa!
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
Unfortunately we do, and will get stung for 20% plus fees on coming into the UKsiobhanellis wrote:but then again we do not have 20% VAT.
Turn On, Tune In, Cop out!