Is a muggy 186 cylinder the same as a standard iron barrel for fitting exhaust flange??
Thanks
Ian
exhaust fitment muggy to cylinder
-
- registered user
- Posts: 58
- Joined: Wed Sep 02, 2009 7:18 pm
- Contact:
-
- registered user
- Posts: 152
- Joined: Wed Jan 02, 2013 10:03 am
- Main scooter: GP TS1 240
- Location: Leicester
- Contact:
yes standard fitment
-
- registered user
- Posts: 58
- Joined: Wed Sep 02, 2009 7:18 pm
- Contact:
Thanks for the info
-
- registered user
- Posts: 349
- Joined: Mon Jan 12, 2009 4:53 pm
- Main scooter: DL 150 1970
- Contact:
If its a recent version ie a V4 kit then no not by a long shot. The recent Mugellos have the exhaust gasket face around 15mm further away from the piston skirt than standard (when the cylinder is fitted the exhaust gasket is 15mm closer to the ground than standard, it was done to aid gas flow out of the cylinder). This can make exhaust fitment a real bitch,see MBs comments about the Mugellos on the BGM clubman thread.
If you meant is the exhaust gasket the same type/shape as standard then yes
If you meant is the exhaust gasket the same type/shape as standard then yes
Slow is the new fast!