SX Li Crank Big End Gap
-
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
The side float should be in the 1.1 - 1.275 mm region, max 1.5 mm
I think the rod should be centralised by the fitting of piston shims? Were any fitted when you took it apart?
I think the rod should be centralised by the fitting of piston shims? Were any fitted when you took it apart?
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
It wasn't me that took it apart but the new piston will not have any shims but I guess the new piston it's slightly wider so it should centralize.rosscla wrote:The side float should be in the 1.1 - 1.275 mm region, max 1.5 mm
I think the rod should be centralised by the fitting of piston shims? Were any fitted when you took it apart?
I've just married up the piston to the small end and there's room for shims so I'll get some in.