Lightened Flywheels

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Lamaddict
registered user
Posts: 1022
Joined: Wed Jan 07, 2009 8:35 pm
Contact:

Fri Sep 20, 2013 11:02 pm

I've just read somewhere recently that lightened flywheels don't make much difference in general performance on a Lambretta tuned engine, any scientific/ engineering views on this?

Muppet
registered user
Posts: 1387
Joined: Thu Sep 16, 2010 9:54 pm
Main scooter: SX 150 running in

Fri Sep 20, 2013 11:05 pm

some know but don't say; when some say but don't know,
im not a complete idiot
.
.
s me of the piec s are mis i g

User avatar
rosscla
registered user
Posts: 5797
Joined: Tue Oct 25, 2011 9:50 pm
Main scooter: Lambretta
Location: Lanarkshire
Contact:

Fri Sep 20, 2013 11:49 pm

Pick up will be quicker with a lightened flywheel but tickover will be less even.
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."

Elite-225
registered user
Posts: 114
Joined: Mon Feb 25, 2013 9:31 pm
Main scooter: GP 225
Contact:

Sat Sep 21, 2013 12:42 am

something about inertia + weight = momentum .. but a too heavy a flywheel will over stress the crank & vice versa

Adam_Winstone
registered user
Posts: 1755
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:

Sat Sep 21, 2013 11:29 am

^... stress on crank is an important factor to remember. When availability of the light AF Ducati flywheels dried up and only the heavy SIL flywheels were available, the number of cranks needing pins welded to stop them twisting went up dramatically. Even when machined to make them lighter, the SIL flywheels still put a lot of stress on the crank assembly. Remember that welding crank pins is a 'bodge' that is often necessary on high cc and high power motors, required as the narrow webs of a Lambretta crank do not provide enough mating surface area for the interference press fit to stop some cranks from twisting. Lighten the flywheel and you seriously lessen the chance of twisting an unwelded crank.

Performance gain.... on pick up, yes. Top end... I doubt it.

Adam

User avatar
jonny snatchsniffer
registered user
Posts: 318
Joined: Mon Jan 12, 2009 11:53 am
Location: camberley, surrey
Contact:

Sat Sep 21, 2013 12:55 pm

its not just about weight either, the circumference also plays a part, so 2 kg closer to the center will spin up faster

soullad
Dealer
Posts: 638
Joined: Sat May 16, 2009 9:20 am
ebay user ID: scooter-techniques
Contact:

Sun Sep 22, 2013 8:31 am

Yep, and if you are getting the flywheel machined, I'd also have the boss welded too, to help prevent it shearing.

User avatar
CutdownSpence
registered user
Posts: 134
Joined: Sun Apr 21, 2013 3:02 pm
ebay user ID: speno66
Main scooter: 1966 Silver Special
Location: Cyprus
Contact:

Sun Sep 22, 2013 8:44 am

Muppet wrote:some know but don't say; when some say but don't know,
Lol you make me die. :lol: :lol:
One Of England's Finest Salad Dodger's.

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 4 guests