PM Tuning Volante antidive disc brake

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
frank sanderson
Dealer
Posts: 161
Joined: Thu Jan 08, 2009 8:43 am
Location: preston
Contact:

Wed Jul 03, 2013 6:09 pm

Did you get the fitting instructions with your hub ? we tell everybody to fit at 90 degrees in the instructions . If you fit at any more or less you run the risk of the problem you describe .above 90 it trys to push outward instead of toward the fork leg below 90 it trys to push in all the force is transmitted toward the joint in the linkage not toward the forkleg .

User avatar
RICSPEED
registered user
Posts: 4485
Joined: Sun Jan 04, 2009 11:30 pm
ebay user ID: ricspeed
Location: YORK

Wed Jul 03, 2013 7:04 pm

MAB wrote:I have just got the Mito twin disc )
very tasty ..

but can you explane .. 90deg in relation to what ..the caliper arm ..links ??
Its in bits scooter club: www.facebook.com/groups/132415046859320

User avatar
RICSPEED
registered user
Posts: 4485
Joined: Sun Jan 04, 2009 11:30 pm
ebay user ID: ricspeed
Location: YORK

Wed Jul 03, 2013 9:01 pm

Its in bits scooter club: www.facebook.com/groups/132415046859320

Minority
registered user
Posts: 692
Joined: Wed Feb 01, 2012 2:00 pm
Main scooter: Li230 S3
Location: Perth, Western Australia
Contact:

Thu Jul 04, 2013 2:18 am

RICSPEED wrote:
MAB wrote:I have just got the Mito twin disc )
very tasty ..

but can you explane .. 90deg in relation to what ..the caliper arm ..links ??
Think Frank means like this (this is a ScootRS setup, but same principle should apply):

Image

Danger
registered user
Posts: 231
Joined: Mon Apr 19, 2010 9:21 pm
Main scooter: lambretta TV200
Location: belfast, NI
Contact:

Thu Jul 04, 2013 1:27 pm

The bracket on the fork leg That the anti dive is bolted too can that be bought separately , and would it work with the pm tunning setup and if it can be bought separately where from cheers danger

User avatar
RICSPEED
registered user
Posts: 4485
Joined: Sun Jan 04, 2009 11:30 pm
ebay user ID: ricspeed
Location: YORK

Thu Jul 04, 2013 5:59 pm

scroll up I posted a link
Its in bits scooter club: www.facebook.com/groups/132415046859320


Danger
registered user
Posts: 231
Joined: Mon Apr 19, 2010 9:21 pm
Main scooter: lambretta TV200
Location: belfast, NI
Contact:

Sat Jul 06, 2013 1:48 pm

Cheers ric

Danger
registered user
Posts: 231
Joined: Mon Apr 19, 2010 9:21 pm
Main scooter: lambretta TV200
Location: belfast, NI
Contact:

Sat Jul 06, 2013 1:52 pm

I bought a pm tuning anti dive disc brake from tr speed shop but I didn't get any instructions with it would any body have any pics or info on how the hub should be fitted plus it say in the add when I bought it that it was for tubeless rims but the studs in mine are about an inch long at most so there's no way my rim will fit can the studs be replaced an if so were from thanks a really pissed off me ,

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 3 guests