I was expecting px125 performance but I'm not even getting close!
I don't think it has a needle?
S2 struggling at higher revs
- onefortheroad
- registered user
- Posts: 148
- Joined: Wed Feb 11, 2009 7:35 pm
- Main scooter: Li125 series 2
- Location: Hull
- Contact:
just read another thread about a carb on an avanti. he cleaned the carb changed bits and whatever but no joy, looks like he resolved it by changing the FULL carb. might be an idea if you can lend a similar carb and give it a try.
i'm also thinking stator/flywheel.
the fun of scootering eh !!
i'm also thinking stator/flywheel.
the fun of scootering eh !!
- onefortheroad
- registered user
- Posts: 148
- Joined: Wed Feb 11, 2009 7:35 pm
- Main scooter: Li125 series 2
- Location: Hull
- Contact:
Cleaned the carb out today and tweaked it a little before replacing the 78 jet- I slackened off the choke a little. Seems to be running better!?
Gonna leave it till I can get out on it again and see how it goes
Gonna leave it till I can get out on it again and see how it goes
Try running it without the filter just to compare !
- onefortheroad
- registered user
- Posts: 148
- Joined: Wed Feb 11, 2009 7:35 pm
- Main scooter: Li125 series 2
- Location: Hull
- Contact:
Finally got round to going for a ride without the air filter but exactly same thing happening- soon as throttle is opened fully loss of power and boggy.
Shall I try a smaller jet? Smaller than 78 but not as small as 73?
Stator plate? Electrics? New carb or a 175 kit
Shall I try a smaller jet? Smaller than 78 but not as small as 73?
Stator plate? Electrics? New carb or a 175 kit