I´ve started building my engine this weekend and have just noticed that the drive side bearing is a 6305.2ZR is this bearing OK to use or do I need to get another one. Its the one with 2 metal covers so you cant see the bearings.
cheers
Steve
Fag 6305.2zr
-
warts
- registered user
- Posts: 7092
- Joined: Thu Aug 04, 2011 6:28 am
- Main scooter: honda
- Location: Fenland
- Contact:
The metal shields are to give greater mechanical protection. There is a "rubber" seal inside. You can prise them out if you only want them on one side.
Can't see any reason to not use them, I fitted them as wheel bearing to mine.
Can't see any reason to not use them, I fitted them as wheel bearing to mine.
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
the shields can be popped out but it should be a c3 rated bearing