Is anybody......

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
celt
registered user
Posts: 61
Joined: Wed Jan 07, 2009 5:31 pm
Location: North Wales
Contact:

Fri Mar 29, 2013 10:07 pm

running an SX200 gearbox with 46t crownwheel 16t front sprocket, 4.5 ratio on a TS1 with JL3 pipe :?:

User avatar
drunkmunkey6969
Moderator
Posts: 4264
Joined: Sun Jan 04, 2009 1:42 pm
ebay user ID: sc00terotica
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Fri Mar 29, 2013 10:49 pm

If they arent...I think they should be. With engine set up to suit..... ;o)

Grumpy225
registered user
Posts: 642
Joined: Sat Nov 24, 2012 7:59 am
ebay user ID: Grumpy225
Main scooter: Gori200, rt195, ld150,rb20
Location: Bakersfield, CA
Contact:

Fri Mar 29, 2013 10:56 pm

Did that exact set up for years. Pulled great with loads of go in all the gears. I was using Taffspeed MK3 exhaust so basically the same thing with a TM35 Mikuni. Probably the best motor I ever ran.

User avatar
celt
registered user
Posts: 61
Joined: Wed Jan 07, 2009 5:31 pm
Location: North Wales
Contact:

Sun Mar 31, 2013 12:51 am

Thanks

Currently using an LI 150 Italian box which is 4.8 ratio using same crownwheel and front sprocket. Have acquired an SX200 box and was wondering whether to put that in, but was unsure if it would be too tall to pull

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 12 guests