Must say just took my time with it all used shrink wrap etc on wiring . fitted a br8es spark plug as well even though i fitted sensor to cowling just to be on safe side . just a few questions
will clock need setting every time i start scoot i dont have a batt on mine ?
Is it pretty straight forward setting ratio etc my front tyre is conti 3.50 - 10 m/c 59 j ?
do i need to change anything in settings as stayed with speedo cable Not sensor in the end ?
How do i get it to mph on clock ?
thanks simon to bloody cold outside to play
sip speedo working with wassel
- sideout
- registered user
- Posts: 348
- Joined: Wed Jan 07, 2009 10:45 pm
- Main scooter: SX150/GP Muggy/LiS3 Avanti TT3
- Location: Weymouth
- Contact:
Additionally, [Setting 4] is 3 for my BGM statorsimonwwfc wrote:Must say just took my time with it all used shrink wrap etc on wiring . fitted a br8es spark plug as well even though i fitted sensor to cowling just to be on safe side . just a few questions
will clock need setting every time i start scoot i dont have a batt on mine ? - No, it remembers at least until the internal battery discharges, a bit like your computer remembering the time.
Is it pretty straight forward setting ratio etc my front tyre is conti 3.50 - 10 m/c 59 j ? - Yes, [Setting 3] mine is set to 1287 (Bridgestone Hoop) with the speedo gear set to 0.78
do i need to change anything in settings as stayed with speedo cable Not sensor in the end ? - [Setting 2] set to INT for speedo cable
How do i get it to mph on clock ? - [Setting 1] Select F for miles and degrees F
thanks simon to bloody cold outside to play
Cheers,
Nigel
Thank you :fb:
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
That looks like a Goodridge? braided hose to me Eden
Turn On, Tune In, Cop out!
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
Yes
Turn On, Tune In, Cop out!
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
We digress...
Turn On, Tune In, Cop out!
yes its mine but goodridge braided hose
I've marked tyre and path did one full turn roughly 1325 ???
Also do I need to touch rpm pulse setting ?
Also do I need to touch rpm pulse setting ?
Had a fiddle with settings in rpm and tried it on 1 it seems way out then on 2 , so left on default I think 3 . Now how do I work out other input to go with 1325 measurement .Eden wrote:1325 sounds about right
leave rpm on the default setting 1st see if it works