I think I know the answer........ but
I was stripping an old Li150 lump at the weekend and found this damage to the outer "o" seal seating. What do you reckon, replace it or risk it?
Cheers,
Nigel
Mag flange damage - second opinion please
if just a chip i would use but it looks cracked aswell so i would say bin it and get a indian replacement
saves loads of hassle in future for little outlay
saves loads of hassle in future for little outlay
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
For what they cost nigel id bin it and start again..
Ricspeed, gone but never forgotten RIP my friend #59
got loads in my garage going spare if you are near norwich
-
- registered user
- Posts: 465
- Joined: Sun Mar 22, 2009 5:15 am
- Location: Richmond Virginia, USA
- Contact:
Weigh it in, there's got to be 25p's worth of ally there
That's not going anywhere...
- sideout
- registered user
- Posts: 348
- Joined: Wed Jan 07, 2009 10:45 pm
- Main scooter: SX150/GP Muggy/LiS3 Avanti TT3
- Location: Weymouth
- Contact:
Weymouth, Micky. Thanks for your offer, but a mate on Portland has come to the rescuemickyb wrote:where abouts in Darrset bud, cos I got a spare one in my garage in Ferndown
Cheers,
Nigel :bouncing: